Description
Show Less
Type:AK Side Scope Mount
Color:Black
Material:Aluminum
Pieces:1
No. of Rails:1
Rail Type:Picatinny Weaver
Net Weight:154g
Country of origin:China
Specification:
AK side mount is milled made out of D16T aluminum alloy with a powder coating. Works on any rifle or shot-gun that has AK style side rail, and forms Picatinny type rail above the rifle receiver cover. For user convenience does not obstruct iron sight view. For ease of use it has an incorporated one lever tightening mechanism. Net Weight 6.2oz
To install:
1. Before installing the bar on the side bar of the receiver, it is necessary to set the lever 3 to the appropriate position.
2. Put the bar on the side bar of the receiver, removing the bar from the butt to the barrel. Turn the lever 3 to the appropriate position, then check the fixation of the bar on the side bar of the receiver.
3. If, after turning the lever 3 into position, the corresponding bar did not lock in or was fixed not firmly enough on the side bar of the receiver, the following steps should be taken:
Detailed product description
The bar above the receiver is installed on the standard base "Eraser tail" located on the AK 103, 104, 105, 74M, 74C, AKMS, AKM, Saygah Mig, Sayg MK-03, Sayg 410 carbines. "and provides an installation on the sighting devices.
Forms the bar "Weaver" "Picatinny" above the receiver
Show Less
Type:AK Side Scope Mount
Color:Black
Material:Aluminum
Pieces:1
No. of Rails:1
Rail Type:Picatinny Weaver
Net Weight:154g
Country of origin:China
Specification:
AK side mount is milled made out of D16T aluminum alloy with a powder coating. Works on any rifle or shot-gun that has AK style side rail, and forms Picatinny type rail above the rifle receiver cover. For user convenience does not obstruct iron sight view. For ease of use it has an incorporated one lever tightening mechanism. Net Weight 6.2oz
To install:
1. Before installing the bar on the side bar of the receiver, it is necessary to set the lever 3 to the appropriate position.
2. Put the bar on the side bar of the receiver, removing the bar from the butt to the barrel. Turn the lever 3 to the appropriate position, then check the fixation of the bar on the side bar of the receiver.
3. If, after turning the lever 3 into position, the corresponding bar did not lock in or was fixed not firmly enough on the side bar of the receiver, the following steps should be taken:
Detailed product description
The bar above the receiver is installed on the standard base "Eraser tail" located on the AK 103, 104, 105, 74M, 74C, AKMS, AKM, Saygah Mig, Sayg MK-03, Sayg 410 carbines. "and provides an installation on the sighting devices.
Forms the bar "Weaver" "Picatinny" above the receiver
